You will then find the StudioLive Rackmount listed as an interface. To learn how to setup the AVB Network interface on the mixer, see the knowledge base article Using AVB with a StudioLive Series III mixer and a Mac. In this situation, we are routing using the USB interface. In the "Output" tab, make sure to select the "StudioLive" mixer you are using device from the list. Click on the Apple in the upper left hand corner and go to "System Preferences" > Click on "Sound" in System Preferences.Ģ. Or connect the USB interface directly to the Mac system:ġ. Mac OSX System Audio Plaback Configurationįirst make sure you connect your computer enabled for AVB into the Ethernet port of your computer to the "Audio Networking" port: You should now be able to play back audio from your computer to the Digital In channel on your StudioLive Series III mixer on your PC computer. If you'd like to play the audio through your headphone output, you can assign the "Phones Cue Source" on the Settings Overview page of UC Surface to the "Main." It will listen to all input faders/buses assigned to the main, before the main fader's position. In UC Surface after selecting the mixer, make sure focus in the Channel Detail area the Digital Return and configure it to source USB.Ĥ. Make sure to find and select your StudioLive 32 device and select it as the Input and Output device for Windows.ģ. On your Windows system, Right-Click on the Speaker in the lower right hand corner > Click "Open Sound Settings."ģ. Make sure that your StudioLive is powered on and connected via USB.Ģ.
Windows System Audio Playback Configurationġ. StudioLive Series III Rack mixer - Firmware Update
Note that if you have not Updated the firmware on your Rackmount mixer, you will want to do this before continuing with the below instructions. When routing general playback audio through the USB and AVB interface for the Series III Rackmount Mixer 24R and 32R is done within UC Surface which needs to be downloaded and installed on your computer first.
0 kommentar(er)
